 |
|||
|
|
|||
| ||||||||||
|
|  MIL-H-48620(AR)
4.2 Classification of inspections. - Unless otherwise specified
herein or in the contract, the following types of inspection shall
be conducted on this item:
a. First Article Inspection
b. Quality Conformance Inspection
4.3 First Article Inspection.
4.3.1 Submission. - The contractor shall submit a first article
sample as designated by the contracting officer for evaluation in
accordance with the provision of 4.3.2. Unless otherwise specified,
the sample for first article approval tests shall consist of three
head assemblies plus three each of all items covered by Supple-
mentary Quality Assurance Provisions (SQAP). The responsibility
(Government or Contractor) for first article testing shall be as
specified in the contract.
4.3.2 Inspections to be performed.
4.3.2.1 Head asseblies. - First article assemblies shall be
tested as specified herein for all the requirements of this
specification, except 3.9.2.
4.3.2.2 SQAP items. - The items covered by SQAP shall be tested
as specified thereon, for all characteristics delineated on the SQAP.
4.3.3 Rejection. - If any head assembly or SQAP item fails to
comply with any of the applicable requirements, the first article
sample shall be rejected. The Government reserves the right to
terminate its inspection upon any failure of an assembly, component,
or subassembly in the sample to comply with any of the stated
requirements.
4.4 Quality Conformance Inspection.
4.4.1 Inspection lot formation. - Unless otherwise specified by
the contracting officer, inspection lot size, lot formation and
presentation of lots shall be in accordance with "Submission of
Product" provisions of MIL-STD-105.
4.4.2 Examination.-The examinations listed herein for Class-
ification of Defects shall be performed on inspection lots as
defined in 4.4.1 of this specification.
8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals