 |
|||
|
|
|||
| ||||||||||
|
|  MIL-H-48620(AR
4.4.2.1 Components and subassemblies. - All components and sub-
assemblies shall be inspected in accordance with the inspection
provisions contained in the Supplementary Quality Assurance Pro-
visions (SQAP) listed in the Technical Data Package (TDP). In the
absence of SQAP'S the applicable Quality Assurance Provisions of
MIL-F-13926 shall apply.
4.4.2.2 Head assemblies. - Subsequent to first article approval,
examination and tests related to Section 3 herein shall be performef
on a single defect (individual characteristic) basis in accordance
with MIL-STD-105, Inspection Level II, and the sampling plans
specified in Tables I, II, III and IV herein. Examination and tests
for packaging, packing and marking shall be in accordance with
MIL-P-14232 and Section 5 herein. The tabulated classification of
defects in Tables I, II, III and IV shall constitute the minimum
inspection to be performed by the supplier after first article
approval and prior to Government acceptance or rejection by item or
lot.
4.4.2.3 100 Percent inspection. - The requirements and tests in
Table I shall be inspected on a 100% basis.
TABLE I - CLASSIFICATION OF DEFECTS
(1OO Percent Inspection)
NOTE: The tests in Table I shall be conducted at a temperature of
0
0
7 3 18 F .
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals