|
| ![]() MIL-I-24078(SHIPS)
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. - Unless otherwise specified in the contract or purchase order, the
supplier is responsible for the performance of all inspection requirements as specified herein. Except as
otherwise specified, the supplier may utilize his own facilities or any commercial laboratory acceptable to
the Government. The Government reserves the right to perform any of the inspections set forth in the
specification where such inspections are deemed necessary to assure supplies and services conform to
prescribed requirements.
4.2 Preproduction inspection. - Preproduction inspection shall consist of the examination and tests
specified in table I, which shall be performed in general in the order listed.
Table I- Preproduction inspection.
Test
Requirement
Inspection
reference
paragraph
3.3
MIL-I-983
General examination
4.6.1
3.24
Operating
Supply line voltage
and frequency
3.3
MIL-I-983
variation
Shielding and radio
frequency noise
MIL-I-983
3.3
reduction
Temperature and
3.3
MIL-I-983
humidity
3.3
MIL-I-983
Inclination
Insulation resist-
3.3
MIL-I-983
ance
3.26.9
4.6.2
Amplifier gain
Amplifier noise and
4.6.7
3.26.12
microphonics
4.6.4 and
3.26.13
Overall frequency
4.6.5
response
Minimum sound
4.6.3
3.26.14
pressure
3.26.15
4.6.6
Amplifier endurance
4.6.8
3.26.16
Signaling circuits
3.3 and
MIL-I-983
Enclosure
3.9
Shock, vibration and
inclination
3.3
MIL-I-983
4.3 Sampling for quality conformance inspection. -
4.3.1 Lot. - All equipment presented for delivery at one time shall be considered a lot. The lot may
include the entire contract quantity or it may be the production of any convenient time period.
4.3.2 Sampling for group A tests. - Sample equipments shall be selected in accordance with MIL-
STD-105 at inspection level III for the tests specified in 4.4. The acceptance quality level (AQL) shall be
1.5 percent.
4.3.3 Sampling for group B tests. - Sample equipments shall be selected in accordance with the table
H for the tests specified in 4.4.
11
--
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |