 |
|||
|
Page Title:
Box, Ammunition Packing, Drawing 8798142 |
|
||
| ||||||||||
|
| MIL-I-60284B
205 Cut, damaged, or improperly sealed bag
Visual
4.2.2.7 Box, Ammunition Packing, Drawing 8798142.
Critical
None defined
Major
None defined
Minor
201 Contents loose Manual
202 Strapping missing, loose, broken, or improperly engaged
Visual/Manual
203 Contents of box exposed Visual
204 Box damaged Visual
205 Marking missing, incorrect, or illegible
Visual
206 Number of units incorrect Visual
4.2.2.8 Box, Fiberboard (Outer) Alternative Ammunition Packing, Drawing 9216933.
Critical
None defined
Major
None defined
Minor
201 Contents loose Manual/Visual
202 Carton broken or damageVisual
d
203 Number of units contained incorrect
Visual
204 Marking missing, incorrect, or illegible
Visual
205 Tape incomplete
Visual
4.2.3 Inspection testing. The following tests shall be performed in accordance with 4.3.
4.2.3.1 Breakaway torque. Each assembly shall be subjected to the breakaway torque test of
the threaded joint between the cap and the chamber. Failure of any assembly to comply with 3.3
shall be cause for rejection of the assembly.
4.2.3.2 Residual magnetism. Each initiator shall be subjected to the test for excessive
residual magnetism as specified in 4.3.2. Failure of any initiator to comply with 3.4 shall be
cause for rejection of the initiator.
4.2.3.3 Firing pin release. The initiator pin of each subassembly shall be subjected to the
firing pin release test. Failure of any subassembly to comply with the requirements of 3.5 shall
be cause for rejection of the subassembly.
8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals