 |
|||
|
|
|||
| ||||||||||
|
|  MIL-L-E43693A(GL)
Shipping containers. The sample unit shall be one shipping container fully
packaged. The inspection level shall be S-2 and the AQL, expressed in terms of
defects per hundred units, shall be 2.5.
Defect
Omitted; incorrect; illegible;
Marking (exterior
location, sequence, or method of application
and interior)
Materials
Any component missing, damaged, or not as specified
Inadequate application of components, such as:
Workmanship
Number per container is more or less than required
4.4.7 Palletization examination. The fully packaged and palletized end items
l
shall be examined for the defects listed below. The lot size shall be expressed
in units of palletized unit loads. The Sample unit shall be
packaged. The inspection level shall be S-l and
defects per hundred units, shall be 6.5.
Defect
Length, width, or height exceeds specified maximum
Finished dimensions
requirement
Palletization
Pallet pattern not as specified
Load not bonded as specified
Weight
Exceeds maximum load limits
Marking
Omitted; incorrect; illegible; of
size,
location, sequence, or method of application
5.
PACKAGING
5.1 Preservation.
Preservation Shall be level A or Commercial,
specified
(see 6.2) .
5.1.1 Level A preservation.
5.1.1.1 Lowering d e v i c e , complete. The Carrying case assembly,
assembly, and governor assembly of each lowering device shall be compactly
folded or arranged as applicable. The governor shall be prevented from having
metal--to-metal contact with the attached snap hook and linking pin components by
means of cushioning material. Prior to folding the carrying case, the record
card and operator's manual shall be placed in the log record and manual pocket
inside the carrying case. The rope shall be lap or accordion folded in manner
12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals