 |
|||
|
|
|||
| ||||||||||
|
|  MIL-L-45935A
AMENDMENT 3
*
Delete 3.3.2 and Substitute:
"3.3.2 Endurance. Launchers shall withstand the firing of 1000
rounds using the 40mm, M781 Practice Round or equivalent, without
malfunction or unserviceable parts. Launchers shall be cleaned
and oiled with lubricant conforming to MIL-L-46000 after each
250 rounds fired and at the close of day's firing. Testing
shall be as specified in 4.5.3.6."
3.3.3 Change "an M16 or M16A1 rifle" to "an M16 or M16A1 or M16A2
rifle".
*
Delete 3.3.3 and Substitute:
"3.3.3 Targeting and Accuracy. The launcher shall be
assembled to an M16, M16A1 or M16A2 rifle and fired at a 200
meter range distance for targeting and accuracy, using
government standard 40mm M781 practice rounds or equivalent.
The top edge of the front sight post flange of the rifle shall be
set flush with or not more than .030 inches below the bottom
surface of the front sight slot, and the leaf sight shall be
unfolded to the sighting position. No adjustment of the leaf
sight shall be made after it has been set in the leaf eight
alignment. Testing shall be as specified in 4.5.3.7.".
3.3.3.2 Change "an M16 or M16A1 rifle" to "an M16 or M16A1 or
M16A2 Rifle".
Add 3.5.1 as shown below:
"3.5.1 Definition of reliability failure.
3.5.1.1 The occurence of a malfunction which cannot be
cleared in 10 seconds. A malfunction is any cessation of any
ability of the system or any of its components to perform its
intended function. A system is the item or combination of items
which are under test.
3.5.1.2 The occurence of a launcher condition which causes
an unwarranted safety hazard to personnel.
3.5.1.3 The occurence of broken or unserviceable part which
renders the launcher inoperable or unsafe if firing is continued.
3.5.1.4 Failures which are attributable to ammunition shall
not be charged against the launcher; they will however, be
recorded."
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals