 |
|||
|
Page Title:
Trigger sear and secondary sear testing |
|
||
| ||||||||||
|
|  MIL-L-45935A
AMENDMENT 3
PAGE 7
*
3.7 Add:
"Bar code label shall be affixed to the receiver and IAW
MIL-STD-1189".
PAGE 8
4.5.2.2.1 Delete "F1183800" and add "F11838246".
Change "the M16 or M16A1 rifle" to "the M16 or M16A1 or M16A2
Rifle".
PAGE 10
4.5.3.4
Delete in its entirety and substitute:
"4.5.3.4 Triqger pull, safety actuatinq torque, pressure
resistance and functioning and breech insert loosening torque.
Each launcher shall be tested for trigger pull (see 3.2.3.9)
safety actuation torque (see 3.2.3.11.2), pressure resistance
and functioning (see 3.3.1) and breech insert loosening torque
(see 3.2.3.5) using the test methods specified in 4.7.2.4,
4.7.2.5, 5.7.4 and 4.7.7.1.1.1 respectively. Failure of the
launcher to pass any of these tests shall be cause for
rejection."
PAGE 11
4.5.3.8.1.1.1 Delete in its entirety and substitute the
following:
"4.5.3.10 Trigger sear and secondary sear testing. A sample
of 50 launchers shall be randomly selected from each inspection
lot for trigger sear and secondary sear requirements of 3.2.3.4
using the test method specified in 4.7.2.6. Failure of the
launcher to pass the above test shall be cause for rejection of
the represented lot. Reconditioned launchers or reconditioned
lots shall be tested using the procedures and test methods
specified above."
PAGE 12
4.6 Change "on a rifle, 5.56mm, M16 or M16A1" to "on an "M16,
M16A1 or M16A2 Rifle".
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals