 |
|||
|
|
|||
| ||||||||||
|
|  MIL-L-45963
4.6.2 Endurance test. Loaders shall be tested for endurance using
a M18, M18A1, SUU-11A/A, or SUU-11B/A slave pod or contractor designed,
Government approved test equipment which simulates the pod ammunition system.
A total of 30,000 rounds of dummy ammunition in belts of 300 rounds
each shall be loaded and unloaded from the slave pod or test equip-
ment. At the completion of the endurance test the loader shall be
subjected to the torque adapter test specified in 4.6.1.1. Dis-
position of endurance tested loaders shall be as specified in the
contract (see 6.2).
4.6.3 Interchange of parts.
4.6.3.1 In plant.
4.6.3.1.1 Loaders. Loaders shall be tested for interchange of
parts by disassembling and then reassembling parts using the parts
and pre-arranged system specified below. Interchange of parts shall
be accomplished by dividing the parts of each loader into three grOUPS
of non-mating parts as shown below and distributing the groups into three
different trays until each tray contains parts for a complete loader.
Groups of parts from the first loader shall be taken in order and placed
in trays 1 through 3; groups of parts from the second loader shall be
taken in order and placed in trays 2,3, and 1; groups of parts from the
third loader shall be taken in order and placed in trays 3, 1, and 2.
Parts such as screws, spring pins, etc., shall be placed in the same tray
as their mating or associate part. Such parts rendered unserviceable
by disassembly shall be replaced without penalty to the interchangeability
test. The loaders shall be reassembled using only those parts which are
in the same trays. Test the reassembled loaders for functioning and
torque. (see 4.6.1 and 4.6.1.1).
Groups of non-mating parts
Group II
Group I
Handle (65B9912)
Adapter, torque (65B1OO27)
Housing assembly (65C9898)
Gear, loader (65C9836)
Roller, push rod (63B10821)
Guide, inner round (65C9851)
Shaft, loader (65B9829)
Guide, forward (65C9838)
Guide, push rod ( 65C9840 )
Group III
Cap, end (65B9832)
Crank, loader (65B9831)
Rod assembly, push (B11686717)
Sprocket, link (65C9830)
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals