 |
|||
|
|
|||
| ||||||||||
|
|  MIL-L-48385 (PA)
4.2 Classification of inspections. - The following types
of inspection shall be conducted on this item.
a.
First Article Inspection
b.
Quality Conformance Inspection
4.3 First Article Inspection
4.3.1 Submission. - The contractor shall submit a first
article sample (see 6.2b) as designated by the Contracting
Officer. The first article sample shall consist of 10 com-
plete sets of parts and sub-assemblies (i.e., 10 each of every
component and sub-assembly, including at least five (5) items
from each cavity used to produce molded parts, and be so identi-
fied as to permit tracing each item to the cavity in which it
was molded). The first article sample shall be evaluated in
accordance with the provisions of 4.3.2 and 4.3.3.
4.3.2 Inspections to be performed. - See MIL-A-48078 and
paras. 4.4.2, testing per para. 4.4 .3 and molding inspections
per para. 4.4.5.
4.3.3 Rejection. - (See MIL-A-48078)
4.4 Quality conformance inspection
4.4.1 Inspection lot formation. - Inspection lots shall
comply with the lot formation provisions of MIL-A-48078. Lot
numbering as required shall be in accordance with MIL-STD-1168.
4.4.2 Examination. - (See MIL-A-48078). Unless otherwise
specified in the classification of defects and test tables,
sampling plans for major and minor defects shall be in accord-
ance with MIL-STD-105, Inspection Level II. Equipment nece-
ssary for the performance of the inspections listed shall be
in accordance with 4.4.4.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals