 |
|||
|
Page Title:
Government furnished inspection equipment |
|
||
| ||||||||||
|
|  MIL-L-60244A(MU)
4.4.1 General. - One linkage assembly shall be selected at random
as a special sampling from each 100 produced. The sample shall meet the
requirements and tests in Table II
TABLE II
4.4.2 Environmental. - Three linkage assemblies shall be selected
at random as samples from each 50 produced, or from each month's produc-
tion, whichever occurs first. Each sample shall have met the require-
ments and tests in Table 111 and shall then meet the requirements and
tests in Table I.
TABLE III
4.4.3 Failure of sample. - Should any one item of a special sampling
fail to meet the specified test requirements, acceptance of the product
shall be suspended by the Government until necessary corrections have been
made by the contractor and the resubmitted samples have been approved
(see 4.3.3).
4.5 Inspection equipment. - Except as otherwise provided for by
the contract, the contractor shall supply and maintain inspection equip-
ment in accordance with the applicable requirements of MIL-I-45607.
4.5.1 Government furnished inspection equipment.- Where the con-
tract provides for Government furnished test equipment, supply and main-
tenance of test equipment shall be in accordance with the applicable re-
quirements specified in MIL-I-45607.
4.5.2 Contractor furnished inspection equipment.
4.5.2.1 Government design.- Unless otherwise specified in the
contract, all inspection equipment specified by drawing number in spec-
ifications or SQAP forming a part of the contract shall be supplied by the
contractor in accordance with technical data listed in the technical data
package (TDP).
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals