 |
|||
|
Page Title:
Table III. Sample size, acceptance criteria, tests, and examinations of the components and the life preservers and preparatio... |
|
||
| ||||||||||
|
|  MIL-L-85347A(AS)
TABLE III.
Sample size, acceptance criteria, tests, and examinations of the components
and the life preservers and preparation for delivery. (See 4.5.1.2)
Paragraph
Inspection
Acceptance
Sample Size
Criteria 1/
--.
Method
Requirement
4.7.1 `-
Visual
Section 3 and
a. Reject all units
a. Every life
examination
preserver for
applicable
with any critical
drawings
critical defects
defect.
b. An acceptable
quality level of 15.0
defects per 100 units
for minor defects
4.7.2
3.9.1
Every life pre-
Reject all defective
server
units
Every life pre-
4.7.3
3.9.2
Reject all defective
server
units
3.9.3
4.7.4
Every life pre-
Reject all defective
server
units
4.7.5
An acceptable quality
3.9.4
level of 1.0 defects
per 100 units
Dimensional
4.7.1.1
3.6 and appli-
An acceptable quality
check
level if 10.0 defects
cable drawings
per 100 units
Preparation
4.7.1.2
Section 5
An acceptable quality
for delivery
level of 2.5 defects
per 100 units
1/ The sample size shall be based upon the applicable sample size code
letter
corresponding to the specified level of MIL-STD-105.
2/ These inspections shall be performed in sequence. The operation
(carbon
dioxide) Inspection shall be performed first, then the buoyancy inspection
(when required) and then the leakage inspection. The results of the
inspection shall be identifiable by the assigned serial numbers which
shall
be marked on the life preserver as specified in 3.8.2.
3/ Pressure inspection may be performed at any time prior to final assembly
of the life preserver.
18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals