 |
|||
|
Page Title:
First article sample disposition |
|
||
| ||||||||||
|
|  MIL-L-85824A(AS)
manufacturer shall submit three life rafts and three sets of top and bottom
The samples shall be representative of the
gaskets (packaged separately).
construction, workmanship, components and materials to be used during
production.
When a manufacturer is in continuous production of these life rafts
from contract to contract, submission of further first article inspection samples
on the new contract may be waived at the discretion of the acquiring activity
Approval of the first article inspection samples or the waiving of
(see 6.2.lf).
the first article inspection does not exclude the requirements for performing the
The first article inspection samples shall be
quality conformance Inspection.
furnished to the Government as directed by the' contracting officer (see 6.2. lg).
4.4.3 First article report.
Upon completion of the first article inspection
program, the Government activity responsible for conducting the Inspection
program (see 6.2.lg) shall report the results of the Inspection program to the
contracting officer, with appropriate recommendations.
4.4.4 First article sample disposition.
Upon completion of the first
article inspection program, sample disposition shall be as follows:
One set of samples shall be returned to the manufacturer for
a.
reference in monitoring production.
One set of samples shall be retained by the Inspection laboratory
b.
for reference during quality conformance verification
inspection (see 4.6) and shall be returned to the
manufacturer with the samples from the final production lot.
One set of samples will be destroyed during the test program and
c.
should not be considered as part of the quantity to be
delivered under the contract.
4.5
The sampling and inspection levels shall
Quality conformance inspection.
The quality conformance Inspection shall consist of the
c o n f o r m to MIL-STD-105.
following:
Visual examination of the life rafts
a.
b.
Dimensional check of the life rafts
Operation (carbon dioxide)
c.
Pressure
d.
Leakage
e.
f.
Weight of the life raft
Packaging
g.
h.
Dimensional check of the top and bottom gaskets
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals