Click here to make tpub.com your Home Page

Page Title: Identification of samples
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MILL87177A
under the atmospheric conditions of 4.3.1 in a draft, dust and fume free
atmosphere.
4.3.3 Inspection lot. An inspection lot shall consist of all material produced during a
single batch operation and offered for acceptance at one time.
4.4 First article inspection
4.4.1 Waiver of article sample inspection. If a contractor has previously furnished the
compound in accordance with the requirements of this specification and his product has
been found to be satisfactory, the requirement for a first article sample and its submittal
for any subsequent contract or order may be waived at the discretion of the procuring
activity.
4.4.2 First article samples. First article sample shall consist of at least five type I filled
pressurized containers (see 3.3.1), or 5 quarts of the type II compound (see 3.3.2).
Samples shall be selected at random from materials (see 3.1) which have been
manufactured or used for filling the contract.
4.4.2.1 Identification of samples. Samples shall be plainly identified by securely
attached durable tags marked with the following information:
LUBRICANT, CORROSION PREVENTIVE COMPOUND, WATER
DISPLACING, SYNTHETIC
GRADE ________
Samples of material subjected to first article
Name of  Manufacturer (Plant in which material is manufactured)
Manufacturer's Designation
Date of Manufacture
Submitted by (Name) (Date) for Contract No. __________
The manufacturer shall submit a copy of test results with the samples showing
conformance with all the requirements of this specification and the applicable
requirements of regulation 49 CFR 173.300 of the Department of Transportation. The
manufacturer shall submit a certified statement specifically identifying each ingredient in
the compound by chemical name, source and percentage by weight.
4.4.3 First article tests. First article sample(s) shall be subjected to all the tests
specified in table II to determine compliance with the requirements of section 3 herein.
4.5 Quality conformance inspection. Samples shall be labeled completely with
information identifying the purpose of the sample, name of product, specification
number, lot and batch number, date of sampling and contract number.
4.5.1 Sampling plan A. One type I filled pressurized container (see 3.3.1) and one quart
of the type II compound (see 3.3.2) shall be selected in accordance with
MILSTD105, inspection level S3 with an AQL 4.0 percent defective and shall be
subjected to the tests specified in table III.
7

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business