 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-13703D(AR)
2.1.2 Other Government documents, drawings, and publications.
The following other Government documents, drawings, and publications
form a part of this specification to the extent specified herein.
DRAWINGS
U.S. ARMY RESEARCH AND DEVELOPMENT CENTER (ARDC)
- Bag, Marker
9224949
- Marker, Marine, Location, Dye AN-M59
9224950
- Box, Packing, Ammunition for Marker,
9224974
Marine, Location, Dye AN-MS9
- Box, Packing, Ammunition for Marker,
9224975
Marine, Location, Dye AN-M59
(Copies of specifications, standards, handbooks, drawings, and
publications required by manufacturers in connection with specific
acquisition functions should be obtained from the contracting
activity or as directed by the contracting officer.)
2.1.3 Order of precedence. In the event of a conflict between
the text of this specification and the references cited herein, the
text of this specification shall take precedence.
REQUIREMENTS
3.
3.1 Materials. Materials shall be in accordance with
applicable drawings and specifications.
3.2 Assembly. The marker shall comply with all requirements
specified on Drawings (dwgs.) 9224949 and 9224950 and with all
requirements specified in applicable specifications.
3.3 Filler.
3.3.1 Sodium salt of fluorescein. The filler shall contain a
minimum of 86 percent sodium salt of fluorescein, when tested aS
specified in 4.5.1.1.
3.3.2 Moisture content. The moisture content at the time of
loading at tne loading station, shall not exceed 2 percent, when
tested as specified in 4.5.1.2.
The filler shall be 100 percent soluble in
3.3.3 Solubility.
water when tested as specified in 4.5.1.2.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals