 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-29416(MC)
AMERICAN SOCIETY OF TESTING AND MATERIALS (ASTM)
ASTM D3951-82 - Standard Practice for Commercial Packaging
(Application for copies should be addressed to American Society for
Testing and Materials, 1916 Race St. , Philadelphia, PA 19103.)
In the event of a conflic between the
2.3 order of precedence.
text of this specification and the references cited h erein, the text
of this specification shall take precedence.
3.
REQUIREMENTS
3.1 First article. Unless otherwise specified (see 6.2), the
contractor shall furnish three units for first article inspection
(see 4.3). The first article shall be manufactured using the same
methods , proc edures, and tooling propos ed for production . Approval
of the first article by the procuring activity shall not relieve the
contrac tor of the obligation to supply equipment conform ing to this
Changes or deviations i n production unit s from the
specifi cation .
approved first article baseline shall require written authorization
by the procuring activity.
3.2 Materials. Materials used in fabrication of the fuel tank
module shall be as specified on Drawing No. 845009A0000. Materials
shall be free of defects and imperfections that might affect the
serviceability and appearance of the finished product.
Substitute
material shall not be utilized prior to written authorization by
the procuring activity. Materials not specified shall be selected
by the contractor and shall be subject to all provisions of this
specification.
Special precautions shall be observed to ensure
that materials in contact with fuel do not contain contaminants
which would preclude its intended use.
3.3 Design and construction. The fuel tank module shall be
fabricated and assembled in accordance with Drawing No. 845009A0000
and as specified herein.
3.3.1 Safety app roval. Necessary actions as prescribed in
49CFR451 (see Code of Federal Regulations) shall be accomplished to
obtain approval of the containers by an appropriate Convention for
Safe Containers (CSC) approval authority (see 49CFR451), Subpart B -
"Approval of New Containers" and the required CSC Safety Approval
Plate shall be provided and affixed to the container as prescribed
in 49CFR451, Subpart C - "Safety Approval Plate". The notice of
approval received from the approval authority which authorizes the
attachment of CSC Safety Approval Plates shall be furnished to the
contracting officer within 30 days of receipt by the contractor.
The contractor shall also provide a certificate to the contracting
officer stating the serial number, model number, and any pertinent
manufacturing identification numbers of the tanks that are covered
under each specific Notice of Approval.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals