|
| INCH-POUND
MIL-M-38510/101H
30 October 2001
SUPERSEDING
MIL-M-38510/101G
08 MAY 1987
MILITARY SPECIFICATION
MICROCIRCUITS, LINEAR, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON
This specification is approved for use by all Departments and Agencies of the Department of Defense.
Inactive for new design after 13 July 1995
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, operational amplifiers. Two product
assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete
part number.
1.2 Part number. The complete part number shall be in accordance with MIL-M-38510.
1.2.1 Device types. The device types shall be as shown in the following:
Circuit
Device type
01
Single operational amplifier - internally compensated
02
Dual operational amplifier - internally compensated
03
Single operational amplifier - externally compensated
04
Single operational amplifier - externally compensated
Dual operational amplifier - externally compensated 1/
05
Dual operational amplifier - externally compensated 1/
06
07
Single operational amplifier, high speed
08
Dual operational amplifier - internally compensated
1.2.2 Device class. The device class shall be the product assurance level as defined in MIL-M-38510.
______
1/ Device types 05 and 06 may be monolithic, or they may consists of two separate, independent die.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-
VAS, 3990 East Broad St., Columbus, OH 43216-5000, by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 5962
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |