 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-38510/101H
1.2.3 Case outlines. The case outlines shall be designated as follows:
Descriptive designator
Terminals
Package style
Outline letter
A 2/
GDFP5-F14 or CDFP6-F14
14
Flat pack
B 2/
GDFP4-14
14
Flat pack
C
GDIP1-T14 or CDIP2-T14
14
Dual-in-line
D
GDFP1-F14 or CDFP2-F14
14
Flat pack
E
GDIP1-T16 or CDIP2-T16
16
Dual-in-line
F
GDFP2-F16 or CDFP3-F16
16
Flat pack
G
MACY1-X8
8
Can
H
GDFP1-F10 or CDFP2-F10
10
Flat pack
I
MACY1-X10
8
Can
P
GDIP1-T8 or CDIP2-T8
8
Dual-in-line
Z
GDFP1-G10
10
Flat pack with gullwing leads
2
CQCC1-N20
20
Square leadless chip carrier
1.3 Absolute maximum ratings.
Supply voltage range (VCC).............................................................................22 V dc 3/
Input voltage range .........................................................................................20 V dc 4/
Differential input voltage range .......................................................................30 V dc 5/
Input current range ..........................................................................................-0.1 mA to +10 mA
Storage temperature range .............................................................................-65C to +150C
Output short-circuit duration ............................................................................Unlimited 6/
Lead temperature (soldering, 60 seconds) .....................................................+300C
Junction temperature (TJ) ...............................................................................+175C 7/
1.4 Recommended operating conditions.
Supply voltage (VCC) ......................................................................................5 V dc to 20 V dc
Ambient temperature range (TA) .....................................................................-55C to +125C
______
2/ Inactive package case outline.
3/ Voltages in excess of these may be applied for short-term tests if voltage difference does not exceed 44 volts.
4/ For supply voltages less than 20 V dc, the absolute maximum input voltage is equal to the supply voltage.
5/ For device types 04, 06, and 07 only, this rating is 1.0 V unless resistances of 2 kΩ or greater are inserted in
series with the inputs to limit current in the input shunt diodes to the maximum allowable value.
6/ Short circuit may be to ground or either supply. Rating applies to +125C case temperature or +75C
ambient temperature.
7/ For short term test (in the specific burn-in and life test configuration when required and up to 168 hours
maximum) TJ = +275C.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals