Click here to make tpub.com your Home Page

Page Title: Microcircuits, Linear, Adjustable, Negative, Voltage Regulators, Monolithic Silicon
Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
. .
INCH-POUND
MIL-M-38510/118B
04 AUGUST 2005
SUPERSEDING
MIL-M-38510/118A
05 November 2003
MILITARY SPECIFICATION
MICROCIRCUITS, LINEAR, ADJUSTABLE, NEGATIVE, VOLTAGE REGULATORS, MONOLITHIC SILICON
This specification is approved for use by all Departments and Agencies of the Department of Defense.
Reactivated for new design as of 05 November 2003. May be used for either new or existing design acquisition.
The requirement for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for three and four terminal monolithic silicon, adjustable,
negative, voltage regulators. Two product assurance classes and a choice of case outlines and lead finish are provided for
each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been
superseded by MIL-PRF-38535, (see 6.4).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as shown in the following:
Device type
Circuit
Case outline letter
01
4-terminal voltage regulator,
X
-30 volts VO -5 volts at 0.5 A
02
4-terminal voltage regulator,
Y
-30 volts VO -5 volts at 1.0 A
03
3-terminal voltage regulator,
X
-37 volts VO -1.25 volts at 0.5 A
04
3-terminal voltage regulator,
Y
-37 volts VO -1.25 volts at 1.5 A
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are designated in MIL-STD-1835 and as follows:
Descriptive designator
Terminals
Device type
Package style
Outline letter
X
See figure 1
4
01
Can
Y
See figure 2
4
02
Flange mount
X
See figure 3
3
03
Can
Y
See figure 4
2
04
Flange mount
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43218-3990, or emailed
to linear@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at http://assist.daps.dla.mil.
AMSC N/A
FSC 5962

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business