|
| INCH-POUND
MIL-M-38510/207E
5 October 2007
SUPERSEDING
MIL-M-38510/207D
16 February 2007
MILITARY SPECIFICATION
MICROCIRCUIT, DIGITAL, 256-BIT, SCHOTTKY, BIPOLAR,
PROGRAMMABLE READ-ONLY MEMORY (PROM), MONOLITHIC SILICON
Inactive for new design after 24 July 1995
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, PROM microcircuits which employ
thin film nichrome (NiCr) resistors, tungsten (W), titanium tungsten (TiW), or zapped vertical emitter (ZVE) as the fusible link
or programming element. Two product assurance classes and a choice of case outlines and lead material and finishes are
provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510
have been superseded by MIL-PRF-38535, (see 6.4).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Device type
Circuit
01, 03
32 word / 8 bits per word PROM with open collector
02, 04
32 word / 8 bits per word PROM with tri-state output
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Descriptive designator
Terminals
Package style
Outline letter
E
GDIP1-T16 or CDIP2-T16
16
Dual-in-line
F
GDFP2-F16 or CDFP3-F16
16
Flat pack
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to
memory@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at http://assist.daps.dla.mil
AMSC N/A
FSC 5962
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |