|
| INCH-POUND
MIL-M-38510/757C
14 November 2003
SUPERSEDING
MIL-M-38510/757B
14 March 2003
MILITARY SPECIFICATION
MICROCIRCUITS, DIGITAL, ADVANCED CMOS,
BUFFER GATES, MONOLITHIC SILICON, POSITIVE LOGIC
Reactivated after 14 Nov. 2003 and may be used for new and existing designs and acquisitions.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits.
Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are
provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510
have been superseded by MIL-PRF-38535 (see 6.3).
Part or identifying number (PIN). The PIN should be in accordance with MIL-PRF-38535 and as specified herein.
1.2
1.2.1 Device types. The device types should be as follows:
Circuit
Device type
01
Hex inverter
02
Hex inverter Schmitt trigger
03
Octal buffer/line driver with three-state outputs
04
Octal buffer/line driver with three-state outputs
05
Octal buffer/line driver with three-state outputs
1/
06
1/
07
08
1/
1/
09
10
Octal inverting bus driver with three-state outputs
11
Octal noninverting bus driver with three-state outputs
1.2.2 Device class. The device class should be the product assurance level as defined in MIL-PRF-38535.
1/ Devices 06 09 were intended to be added in the future, see 6.7.
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAC, 3990 East Broad St., Columbus, OH 43216-5000, or email to
cmos@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at www.dodssp.daps.mil.
AMSC N/A
FSC 5962
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |