 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-38510/757C
1.2.3 Case outlines. The case outlines should be as designated in MIL-STD-1835 and as follows:
Descriptive designator
Terminals
Package style
Outline letter
C
GDIP1-T14 or CDIP2-T14
14
Dual-in-line
D
GDFP1-F14 or CDFP2-F14
14
Flat pack
R
GDIP1-T20 or CDIP2-T20
20
Dual-in-line package
S
GDFP2-F20 or CDFP3-F20
20
Flat pack
Y
GDFP1-G14
14
Flat pack with gull wing
Z
GDFP1-G20
20
Flat pack with gull wing
2
CQCC1-N20
20
Square chip carrier
1.3 Absolute maximum ratings. 1/ 2/
Supply voltage range (VCC)......................................................................................... -0.5 V dc to +6.0 V dc
DC input voltage range (VIN)....................................................................................... -0.5 V dc to VCC +0.5 V dc
DC output voltage range (VOUT) .................................................................................. -0.5 V dc to VCC + 0.5 V dc
Clamp diode current (IIK, IOK) ...................................................................................... 20 mA
DC output current (IOUT) .............................................................................................. 50 mA
DC VCC or GND current (ICC, IGND) .............................................................................. 100 mA
Storage temperature range (TSTG) .............................................................................. -65C to +150C
Maximum power dissipation (PD) ................................................................................ 500 mW
Lead temperature (soldering, 10 seconds) ................................................................. +300C
Thermal resistance, junction-to-case (ΘJC) ................................................................. See MIL-STD-1835
Junction temperature (TJ) ........................................................................................... +175C
Case operating temperature (TC)................................................................................ -55C to +125C
1.4 Recommended operating conditions. 2/ 3/ 4/
Supply voltage range (VCC)......................................................................................... +3.0 V dc to +5.5 V dc
Input voltage range (VIN) ............................................................................................. +0.0 V dc to VCC
Output voltage range (VOUT) ....................................................................................... +0.0 V dc to VCC
Case operating temperature range (TC)...................................................................... -55C to +125C
Input low (VIL) maximum voltage ................................................................................ 0.90 V dc at VCC = 3.0 V dc
1.35 V dc at VCC = 4.5 V dc
1.65 V dc at VCC = 5.5 V dc
Input high (VIH) minimum voltage................................................................................ 2.10 V dc at VCC = 3.0 V dc
3.15 V dc at VCC = 4.5 V dc
3.85 V dc at VCC = 5.5 V dc
Input rise and fall rate (tr, tf) maximum:
(device types 01, 03, 04, 05 and 11), VCC = 3.6 V, VCC = 5.5 V ............................... 8 ns/V
1.5 Radiation features.
Maximum total dose available (dose rate = 50 300 rads (Si)/s):
Device types 04, and 11 ........................................................................................ 100 krads (Si)
Device types 01, 02, 03. and 05 ............................................................................ 300 krads (Si)
1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the
maximum levels may degrade performance and affect reliability. The maximum junction temperature may be exceeded for
allowable short duration burn-in screening conditions in accordance with MIL-PRF-38535.
2/ Unless otherwise noted, all voltages are referenced to GND.
3/ Operation from 2.0 V dc to 3.0 V dc is provided for compatibility with data retention and battery back-up systems. Data
retention implies no input transitions and no stored data loss with the following conditions: VIH ≥ 70 percent of VCC, VIL ≤ 30
percent of VCC, VOH ≥ 70 percent of VCC at 20 A, VOL ≤ 30 percent of VCC at 20 A.
4/ Unless otherwise specified, the values listed above shall apply over the full VCC and TC recommended operating range.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals