 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-38510/9E
Device type 04
Width of clock input pulse ...................................................
20 ns minimum
Width of load input pulse ....................................................
25 ns minimum
Clock enable setup time .....................................................
30 ns minimum
Parallel input setup time .....................................................
10 ns minimum
Serial input setup time ........................................................
35 ns minimum
Shift setup time ..................................................................
45 ns minimum
Hold time at serial input ......................................................
0 ns maximum
Hold time at parallel input ..................................................
25 ns maximum
Device type 05
Width of clock input pulse ...................................................
20 ns minimum
Width of clear input pulse ...................................................
20 ns minimum
Data input setup time .........................................................
20 ns minimum
Clear input setup time ........................................................
25 ns minimum
Hold time at any input .........................................................
7 ns minimum
Mode control setup time ....................................................
30 ns minimum
Device type 06
Width of clock input pulse ...................................................
16 ns minimum
Width of clear input pulse ...................................................
12 ns minimum
Shift load input setup time ..................................................
32 ns minimum
Data input setup time .........................................................
25 ns minimum
Clear input setup time ........................................................
25 ns minimum
Shift load release time ........................................................
10 ns maximum
Data hold time ....................................................................
0 ns minimum
2.0 APPLICABLE DOCUMENT
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all specified requirements of documents cited in
sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a part of this specification to
the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-38535 -
Integrated Circuits (Microcircuits) Manufacturing, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883
-
Test Method Standard for Microelectronics.
MIL-STD-1835
-
Interface Standard Electronic Component Case Outlines
(Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or
http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited
herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals