 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-46314B(MU)
4.2.2 Contractor testing.- When the contractor is responsible for
conducting first article approval tests, the sample shall be inspected by
the contractor for all the requirements of the contract. The sample and a
record of this inspection, including certificates of conformance for materials,
shall be submitted to the Government for approval. The Government reserves
the right to witness the contractor's inspection.
4.3 Inspection provisions.
4.3.1 Submission of product.- Unless otherwise specified by the
contracting officer, inspection lot size, lot formation and presentation of
lots shall be in accordance with "Submission of Product" provisions of
MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies.- All components and subassemblies
shall be inspected in accordance with the inspection provisions contained in
Supplementary Quality Assurance Provisions (SQAP) provided with the technical
data package (TDP). In the absence of SQAP's, the applicable Quality Assurance
Provisions of MIL-F-13926 shall apply.
4.3.2.2 Final-acceptance inspection.- Subsequent to first article
approval, examination and tests related to Section 3 herein shall be per-
formed on a single defect (individual characteristic) basis in accordance
with MIL-STD-105 and the sampling plan specified in Table IV below. Examina-
tion and tests for Packaging, Packing and Marking shall be in accordance with
MIL-P-14232 and Section 5 herein. The tabulated classification of defects
in Table IV and V shall constitute the minimum inspection to be performed by
the supplier after first article approval and prior to Government acceptance
or rejection by item or lot.
TABLE IV - CLASSIFICATION OF DEFECTS
6.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals