 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-46314B(MU)
4.3.2.3 Acceptance and rejection.- Rejected lots shall be screened for
all defective characteristics. Removal or correction of defective units and
resubmittance of rejected lots shall be in accordance with "Acceptance and
Rejection" as specified in MIL-STD-105,
4.3.3 Certification. - Certification shall include test data and results
for all characteristics specified below. Certification will be required
prior to performing final acceptance inspection and shall suffice for the
remainder of the production quantities, provided the manufacturing processes
and techniques used to produce the items for which certification was issued
have not been changed or revised. Any and all changes will raequire a new
certification from the contractor.
CHARACTERISTIC
TEST DATA TO COMPLY WITH
Fabrication
3.1
General specification
3.2
4.4 Special sampling for environmental testing.
4.4.1 Special sampling.- Sampling inspection for characteristics listed
in the following table shall be in accordance with inspection level S3,
Table I of MIL-STD-105. Acceptance or rejection of the lot shall be in
accordance with AQL 2.5 of Table II-A of M1L-STD-105. Samples shall have
met all the requirements and tests outlined in Table IV prior to being
subjected to the following examination and tests.
TABLE V
7.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals