 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-50747(MU)
8 August 1973
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in
the contract or purchase order, the supplier is responsible for the per-
formance of all inspection requirements as specified herein. Except as
otherwise specified, the supplier may utilize-his own or any other-facilities
suitable for the performance of the inspection requirements specified here-
in, unless disapproved by the Government. The Government reserves the
right to perform any of the inspections set forth in the specification where
such inspections are deemed necessary to assure supplies and services
conform to prescribed requirements
4.1.1 General provisions, The component and subassembly inspec-
tion requirements of MIL-F-13926 form a part of the quality assurance
provisions of this specification. Definitions of inspection terms shall be
as listed in MlL-STD-109.
4.2 First article [initial production) approval. The requirements
for first article approval and the responsibility (Government or contractor)
for first article testing shall be as specified in the contract The sample
for first article approval tests shall consist of three assemblies. The
sample shall be manufactured in the same manner, using the same materials,
equipment, processes, and procedures as used in regular production. All
parts and materials, including packaging and packing, shall be obtained
from the same source of supply as used in regular production.
4.2.1 Government testing. When the Government is responsible
for conducting first article approval tests, the contractor prior to submit-
ting the sample to the Government, shall inspect the sample to insure
conformance to to the requirements of this specification. A record
of this inspection, including certificates of conformance for materials,
shall be submitted with the sample.
4. 2.2 Contractor testing. When the contractor is responsible for
conducting first article approval tests, the sample shall be inspected by
the contractor for all the requirements of this specification, The
sample and a record of this inspection, including certificates of con-
formance for materials, shall be submitted to the Government for
approval. The Government reserves the right to witness the contractor's
inspection.
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals