 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-63321A(AR)
PREPARATION FOR DELIVERY
5.
5.1 Preservation, packaging and packing. Devices shall be delivered
under this specification shall be prepared for delivery in accordance
with the requirements of MIL-M-38510, Level C. Electrostatic discharge
(ES) protection in accordance with the requirements of MIL-M-55565 shall
be provided.
Marking shall be in accordance with MIL-STD-1188.
5.2 Marking.
5.3 Shipping. When microcircuit circuit packages of more than one
lot are shipped together, each lot shall be kept separate and the
division between lots clearly indicated to prevent mixing of the lots in
transit.
6.
NOTES
6.1 Intended use. The device covered by this Specification is
intended for use in the U.S. Army Ordnance.
The procurement documents shall specify the
6.2 Ordering data.
following:
Title, number and date of this specification.
a.
b.
Provisions for submission of first article samples.
c.
Provisions of MIL-M-38510.
Requirement for certification of conformance for each lot
d.
or shipment of product.
6.3 Submission of inspection equipment designs for approval. (See
4.4.4). Submit equipment designs as required to:
6.4 Drawings. Drawings listed in section 2 of this specification
under the heading U.S. ARMY ARMAMENT RESEARCH AND DEVELOPMENT COMMAND
(ARRADCOM) may also include drawings prepared by, and identified as
Edgewood Arsenal, Frankford Arsenal, Rock Island Arsenal or Picatinny
Arsenal drawings. Technical data originally prepared by these activities
is not under the cognizance of ARRADCOM.
6.5 Distribution of shop traveler(s), inspection and test results,
process control. Shop traveler(s), inspection and test results and
process control shall be sent to: Commander, U.S. Army Armament Research
& Development Command, ATTN: DRDAR-QAA-M. Dover, New Jersey 07801.
20
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals