 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-63324A(AR)
3.7 Data requirements. Data shall be recorded on a go/no-go
basis and retained for all tests called out by this specification in
accordance with 4.5.4. The contractor shall submit to the
qualifying agency accept/reject limits used for each go/no-go test.
3.8 Process controls. All process controls essential for
manufacturing of devices to assure a reliable end item shall be
submitted to the designated agency specified in 6.6 herein, prior to
the start of fabrication.
3.9 First article inspection. This specification contains
technical provisions for first article inspection. Requirements for
the submission of first article samples by the contractor shall be
as specified in the contract.
3.10 Workmanship. Devices shall be manufactured, processed,
and tested in a careful and workmanlike manner in accordance with
good engineering practice, with the requirements of this
specification, and with the production practices, workmanship
instructions, inspection and test procedures, and training aids
prepared by the manufacturer.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection and standard quality
assurance provisions. Unless otherwise specified herein or in the
contract, the provisions of MIL-M-38510 shall apply and are hereby
made part of this detail specification the supplier is responsible
for the performance of all inspection requirements as specified
herein, and the supplier may use his own or my other facilities
suitable for the performance of the inspection requirements
specified herein, unless disapproved by the Government. In
addition, the Government reserves the right to perform any of the
inspections set forth in the specification where such inspections
are deemed necessary to assure supplies and services conform to
prescribed requirements.
4.2 Classification of inspections. The following types of
inspection shall be conducted on this item.
a. First Article Inspection
b.
Quality Conformance Inspection
c. Screening
4.3 First article inspection
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals