 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-70453A (AR)
3.10 Workmanship. The workmanship requirements of MIL-F-
13926 shall be met. The exterior protective surface finishes
shall be free of any defects which affect their function,
protective qualities or appearances.
4.
QUALITY ASSURANCE PROVISIONS
Unless otherwise
4.1 Responsibility for inspection.
specified in the contract or purchase order, the contractor is
responsible for the performance of all inspection requirements
(examinations and tests) as specified herein. Except as
otherwise specified in the contract or purchase order, the
contractor may use his own or any other facilities suitable for
the performance of the inspection requirements specified herein,
unless disapproved by the Government. The Government reserves
the right to perform any of the inspections set forth in this
specification where such inspections are deemed necessary to
ensure supplies and services conform to prescribed requirements.
4.1.1 Responsibility for compliance. All items shall meet
all requirements of Sections 3 and 5. The inspection set forth
in this specification shall become a part of the contractor's
overall inspection system or quality program. The absence of any
inspection requirements in the specification shall not relieve
the contractor of the responsibility of ensuring that all
products or supplies submitted to the Government for acceptance
comply with all requirements of the contract. Sampling
inspection, as part of manufacturing operations, is an acceptable
practice to ascertain conformance to requirements; however, this
does not authorize submission of known defective material, either
indicated or actual, nor does it commit the Government to accept
defective material.
4.1.2 General provisions. Unless otherwise specified
herein, the provisions of MIL-F-13926 apply and form a part of
this specification. Reference shall be made to MIL-STD-109 to
define quality assurance terms used herein.
4.2 Classification of inspections. The inspection
requirements specified herein are classified as follows:
First article inspection (see 4.3).
a.
b.
Quality conformance inspection (see 4.4).
Special sampling inspections (see 4.5).
c.
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals