 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-70453A (AR)
4.2.1 Inspection conditions. Unless otherwise specified,
all examinations and tests shall be conducted at the following
standard ambient conditions:
+50F (+16C) to +90F (+32C)
a.
Temperature
90% RH max.
Relative humidity
b.
28 to 32 inches of Hg
Pressure
c.
4.3 First article inspect ion.
4.3.1 Submission. The contractor shall submit a first
article sample as designated by the Contracting Officer
consisting of three (3) each of the following items, and one each
of all remaining items covered by QAPs in TDPL for inspection in
accordance with provisions of 4.3.2.
Quanti ty
Drawing
QAP
Name
3
9360169
Mount, Telescope
3
9360178
9360178
Knob Assembly
3
9360180
9360180
Scale Assembly
3
9360182
9360182
Knob Assembly
3
9360184
9360184
Holder Assembly
3
11741740
11741740
Shaft Assembly
3
11741741
11741741
Shaft Assembly
3
11741770
11741770
Housing
3
11741774
11741774
Gear
11741792
11741792
Bracket Assembly
4.3.2 Inspections to be performed. As determined by the
Government, the first article assemblies, components and test
specimens may be subjected to any or all of the examinations and
tests specified in this detail specification and be inspected for
compliance with any or all requirements of the applicable
drawings.
4.3.3 Rejection. If any assembly, component or test
specimen fails to comply with any of the applicable requirements,
the first article sample shall be rejected. The Government
reserves the right to terminate inspection upon any failure of an
assembly, component or test specimen to comply with any of the
requirements.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals