 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-70453A (AR)
Ouality conformance inspection.
4.4
4.4.1 Inspection lot formation. The term "inspection lot"
is defined as a homogeneous collection of units of product from
which a representative sample is drawn or which is inspected 100
percent to determine conformance with applicable requirements.
Units of product selected for inspection shall represent only the
inspection lot from which they are drawn and shall not be
construed to represent any prior or subsequent quantities
presented for inspection. Homogeneity shall be considered to
exist provided the inspection lot has been produced by one
manufacturer, in one unchanged process, using the same materials
and methods, in accordance with the same drawings, same drawing
revisions, same specifications and same specification revisions.
All material submitted for inspection in accordance with this
specification shall comply with the homogeneity criteria
specified herein, regardless of the type of inspection procedure
which is being applied to determine conformance with
requirements.
Examinations and tests.
4.4.2
Components, assembl ies and subassemblies.
4.4.2.1
Quality
a. Cla ssification of ch aracteristics.
conformance examinations and tests are specified in the following
classification of characteristics paragraphs. The contractor's
quality program or detailed inspection system shall provide
assurance of compliance of all characteristics with the
applicable drawing and specification requirements utilizing as a
minimum the conformance criteria specified. When cited herein,
attributes sampling inspection shall be conducted in accordance
with Table II below, using the inspection levels stated in the
Classification of Characteristics paragraphs.
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals