 |
|||
|
Page Title:
Torque. azimuth, and elevation knobs. |
|
||
| ||||||||||
|
|  MIL-M-70453A (AR)
rotated clockwise approximately 180 degrees with the azimuth
control knob, stopping with the 3200 mil mark on the index.
Counterclockwise and clockwise torque values shall be obtained at
the 3200 mil position in the same manner as that detailed for the
O mil position. Extreme care must be taken in the design and
operation of the test equipment to assure that not even the
slightest movement be imparted to the scale in the same
direction, as the torque is being measured, as this could result
in erroneous readings. If all four torque values do not equal or
exceed the minimum value specified in paragraph 3.8.4.1, the
sightunit shall be rejected.
4.7.8.7 Torque. azimuth, and elevation knobs. Utilizing
the appropriate torque wrench with adapter, the running torque
required to rotate the knobs throughout their range of rotation
shall be within the values specified in 3.8.5, for the
temperature indicated.
The mount shall be subjected to a
4.7.9 Workmanship.
visual and tactile examination for evidence of faulty
workmanship. The mount shall conform to the requirements of
3.10.
PACKAGING
5.
5.1 General. Preservation, packing and marking shall be in
accordance with Special Packaging Instruction PS 9360169 and DLAM
4145.8. The level of protection shall be as specified in the
procurement document.
NOTES
6.
(This section contains information of a general or explanatory
nature that may be helpful, but is not mandatory. )
6.1 Intended use. The Mount, Telescope, 9360169, is a
component of Sightunit, M64A1. The mount introduces measured
azimuth and elevation readings to Elbow Telescope, 9360257. The
sightunit is used with the U.S. Army mortar systems.
Acquisition documents must
6.2 Acquisition requirements.
specify the following:
Title, number and date of this specification.
a.
Issue of DODISS to be cited in the solicitation,
b.
and, if required, the specific issue of individual
documents referenced (see 2.1.1).
24
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals