 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-81260A(AS)
Items whose manufacture or assembly is simple, and those items adequately
depicted in the Illustrated Parts Breakdown, shall not be covered.
TECHNICAL CONTENT. - Technical content shall be ar-
3.3
ranged as specified herein for Type I, Type II, and Type III manuals (See 3.4,
3.5, and 3.6). Data shall be consistent with the capabilities of the organization,
intermediate and depot activities and the approved GSE. Maintenance procedures
shall refer to the approved GSE. The requirements for coverage of approved
GSE use, maintenance, and fabrication are common to all maintenance manuals
defined herein; therefore, coverage for GSE shall be prepared in accordance
with the applicable maintenance manual (Type I, Type II, or Type III) plan. If
GSE is not required, a statement shall be included in the manual to this effect.
GSE presentation shall be as follows:
3.3.1
GSE Listing.~ - The NAVAIR approved GSE required to
perform the appropriate level of maintenance covered in the manual shall be
listed in tabular form in four columns consisting of, Part Number, Manufacturer,
Noun Name, and Key to Text. If alternate GSE is approved, it shall be listed.
Common types of test equipment, such as voltmeters, signal generators, tube
testers, etc., shall be listed; however, common tools, such as screw drivers,
pliers, side cutters, soldering irons, etc., shall not be listed. When multi-
volume manuals are used, the first volume shall include a consolidated listing
of all GSE listed in all volumes.
Part Number Column. - The part number column shall
3.3.1.1
list the manufacturer's part number. Superseding part number(s) shall use the
same index number(s) as the super sealed part number(s).
Manufacturer's Column. - This column shall indicate the
3.3.1.2
numerical code or company name as used on the drawing on which it appears.
Noun Name Column. - The noun name listed in this column
3.3.1.3
shall be the one that appears on the engineering drawing.
Key to Text Column. - This column shall indicate by sec-
3.3.1.4
tion and paragraph numbers the parts of the text which calls out the use of each
item of equipment by part number.
GSE Maintenance. - When separate GSE maintenance man-
3.3.2
uals or MRC work cards are not procured for peculiar GSE provided by the con-
tractor (very simple items; tools, work stands, etc), maintenance instructions
for such GSE shall be included in the maintenance manual(s) applicable to the
aircraft, equipment, or component for which the peculiar GSE was provided.
Instructions for required fabrication of peculiar tools, when such fabrication
is approved by the procuring activity, shall be included. Concise step-by- step
8
--
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals