 |
|||
|
Page Title:
Table of Critical Wire Lengths. |
|
||
| ||||||||||
|
|  MIL-M-81260A(AS)
Explanatory material shall be added in the introduction so that maintenance per-
sonnel are guided to the proper continuation diagram. This explanation shall
cover both serialization and figure designator information. The sheet number
shall be included when the referenced figure is a multiple sheet illustration.
e. Electric cable and wire shall be identified on the
wiring diagram exactly as identified in the aircraft, except that the wire size
numbers need not be shown on wires included for reference purposes only.
f. Part number, nomenclature, and location of each part,
as required for clarity, shall be shown on the diagram immediately adjacent to
related equipment. When inclusion of part numbers, nomenclature, or location
creates excessive congestion on the face of the drawing, one or more of these
items may be deleted and furnished in a separate listing(s). This listing shall
immediately precede the diagram when space does not permit it to be located on
the diagram itself.
3.4.6.4.1
A wire list cross-reference table shall be included which
will identify all intercomponent wiring and connection points for each component
or subgroup of components which terminates with a plug, terminal strip, switch,
etc. The junction points shall be labeled to indicate the necessary designator of
the first connection within the other component or other significant point of ter-
mination.
Terminal Arrangement Diagrams. - Diagrams shall illustrate
3.4.6.5
each terminal panel or block installed in the aircraft, with individual terminal
designators arranged in the same sequence in which they appear in the aircraft.
Wire segments shall have the wire code indicated.
3.4.6 .5.1
Separate diagrams and drawings for each different electric
or electronic configuration of the same model aircraft shall be provided. Appli-
cation shall be noted by aircraft serial or Bureau number. Where a group of
terminal blocks are installed in junction box fashion, there shall be at least one
drawing identifying the contents, connectors and connections.
Table of Critical Wire Lengths. - A "Table of Critical Wire
3.4.6.6
Lengths" shall be included on a diagram when necessary to indicate the allowable
length and splicing limitation: for a given size of wire, power cabling or cabling
in circuits handling heavy current loadings, balanced circuits, etc.
Wire Repair. - Instructions for the repair and replacement
3.4.6.7
of compact wire bundles shall except that information contained in
the lPB shall not be repeated.
24
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals