|
| MIL-M-81260A(AS)
3.5
TYPE II - INTERMEDIATE MAINTENANCE MANUALS
3.5.1
Content Requirements for Type II Manuals. - Type II man-
uals shall contain intermediate level maintenance instructions required for
maintenance of components of aircraft (or end item) systems, groups of systems,
or equipment when separate coverage (manuals) is not provided (See 3.5.1.1.)
Equipment grouping in the intermediate manuals shall correspond to that in the
applicable organizational maintenance manuals. Instructions for checkout,
troubleshooting, repair, replacement, adjustment, test, recalibration, and
preparation for installation or shipment of components within a system shall be
provided. Equipment and its components shall be treated functionally.
3.5.1.1
Type II Component/Equipment Manuals. - When the com-
plexity of a component(s) or equipment is such that the procuring activity pro-
cures a separate intermediate maintenance manual(s) for such component(s),
or equipment the manual(s) shall be prepared in accordance with 3.5.4.
3.5.1.2
Referencing Component Manuals. - Information contained in
component or equipment manuals shall not be repeated in other maintenance
manuals but shall be referenced as applicable.
3.5.2
Content Arrangement for Type II Manuals. - In addition to,
and to supplement the applicable content requirements specified in 3.3 through
3.3.3, the following shall be included in the order listed:
To facilitate maintenance, content arrangement for
system or subsystem maintenance and repair data shall
be located insofar as practicable within a given manual
section or volume.
a.
Introduction
System or component description
b.
c.
GSE maintenance
d.
Intermediate maintenance
Systems maintenance
1.
Component maintenance
2.
(a)
Difference data sheets
25
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |