 |
|||
|
Page Title:
Table VI. Straightness tolerances of bar |
|
||
| ||||||||||
|
|  MIL-N-46025B(MR)
Table V.
Tolerances of cut straight lengths
Tolerance, inch
Length, feet
(plus only)
Up to 6, incl.
0.125
Over 6
.250
3.3.3 Straightness. The deviation from straightness shall not be
greater than the amounts in table VI.
Table VI.
Straightness tolerances of bar
Distance between
Permissible deviation
parallel faces,
(depth of arc)
inch
inch
All sizes
0.025 per foot of length
3.4
Dimension tolerances, flat wire (ribbon).
3.4.1 Thickness. The thickness of the flat wire (ribbon) shall not vary
by more than the amounts shown in table VII.
Table VII.
Thickness tolerances for flat wire (ribbon)
Thickness,
Tolerance, inch
inch
(plus and minus)
Up to 0.006, incl.
0.0003
Over 0.006 to 0.009,
incl.
.0005
Over 0.009 to 0.025,
incl.
.0007
Over 0.025 to 0.048,
incl.
.001
Over 0.048 to 0.187,
incl.
.002
3.4.2 Width. The width of flat wire (ribbon) shall not vary by more
than the amounts shown in table VIII.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals