|
| MIL-N-81497A(AS)
QUALITY ASSURANCE PROVISIONS
4.
Responsibility for Inspection - Unless otherwise
4.1
specified in the contract or purchase ordeer, the supplier is responsible
for the performance of all inspection requirements as specified herein.
Except as otherwise specified, the supplier may utilize his own facili-
ties or any commercial laboratory acceptable to the Government. The
Government. reserves the right to perform any of the inspections set
forth in the specification where such inspections are deemed necessary
to assure supplies and services conform to prescribed requirements.
Classification of Tests - Items covered by this
4.1.1
specification shall be subjected to the following tests to determine
compliance with all applicable requirements.
(1) Preproduction Tests
(2)
Initial Production Tests
(3) Acceptance Tests
(4) Life Tests
Preproduction Tests - Preproduction tests shall be
4.2
made on an equipment representative of the production equipments to
Preproduction tests shall be accom-
be supplied under the contract.
plished under the responsibility of the contractor and shall be conducted
in accordance with the approved test procedure of 4.6. The govern-
ment inspector and the procuring representative may be designated to
witness the tests when so desired. Contractors not having adequate
facilities to conduct all required tests shall obtain the services of a
commercial testing laboratory acceptable to the Government.
4.2.1
Preproduction Test Data - The contractor shall submit
all data collected in conducting these tests to the procuring agency
for review and approval.
Scope of Tests - Preproduction tests shall include
4.2.2
all tests deemed necessary by the procuring activity to determine
that the equipment meets all the requirements of this specification
and the contract. Preproduction tests shall include environmental
tests in accordance with the procedures of MIL-T-5422 and interference
tests in accordance with MIL-I-6181.
53
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |