|
| MIL-N-85005A(AS)
Panel Illumination - The Control shall incorporate an
3.5.2.7
integrally illuminated information panel per MIL-P-7788, Class 2W, Type
V. (See Figure 8.) Excitation shall be 5 VAC derived from the dimmable
26 VAC from the external dim control.
*3.5.2.8 Electrical Connections - Connections to external circuits
shall be provided as listed.
Reference
Function
Receptacle Type
Designation
Digital Displays
SJTP02RE18-35S(023)
J1
Data and Discretes
SJTP02RE14-35P(023)
J2
Logic and Lighting
MS27508E24F24PB
J4
Power
System Power - The equipment shall utilize system power
3.5.2.9
as follows:
(1) 115 VAC, 400 Hz, 3 0, 60 VA, from the SDC.
(2) 0 - 26 VAC, 400 Hz, 1 0, 0.8 Amp, from the SDC.
(3) 0 - 4.5 VDC regulated, from the Digital Display
Indicator, 6.5 watts.
(4) 5 VDC regulated, 24 watts from the SDC.
3.5.2.10 Mounting - Chassis and mounting requirements of YIIL-C-
6781 and MS25212 shall apply.
3.5.2.11 Color - Surface shall be painted lusterless gray, No.
36231 in accordance with FED-STD-595.
Digital Display Indicator (DDI) ID-2035/ASN-124 - The
3.5.3
Digital Display Indicator shall meet the following requirements:
Function - The Digital Display Indicator shall interface
3.5.3.1
directly with the Keyer Control as defined in Paragraph 3.5.2. The
Digital Display Indicator shall function as the primary navigational
alphanumeric display from the NC to the operator. The displays shall be
capable of being updated independently and in any sequence.
- 44 -
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |