Click here to make tpub.com your Home Page

Page Title: Descriptive data
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
ML-P-17869A(SHIPS)
4.6.6 Oil pressure shall be determined by m cans of calibrated dial
pressure gages of the Bourdon type.
4.6.7 Noise measurements during each test shall always be made under
the same conditions. Air -borne noise shall be measured at several locations
about the test specimen at a distance of 3 feet from the location, Several
structure noise measurements shall be made on the specimen structure using
a suitable probe.
4.7 Descriptive data. - The following data shall be noted and recorded
for transmit tal with the information specified in 4.8 and 4.9:
(a) Pump data - (Omit items not applicable.)
(1) Manufacturers designation, size and type of pumps.
(2) Bore of cylinders.
(3) Number of pistons, vanes or gear data.
(4) Material used in construction, all parts.
(5) Type of bearings.
($) Rated working pressure and allowable overload.
(7) Displacement at rated working pressure - Cubic
inches per revolution.
(8) Speed rating (r.p.m.).
(9) Stroking method.
(10) Maxim urn angle of piston rod tilt plate.
(11) Source of pressure if servo stroked.
(12) Grade of oil used (Military symbol).
(13) Manufacturers tern perature limits.
(14) Weight.
(15) Type of pipe connections and seals.
(b) Hydraulic motor data - (Omit items not applicable. )
(1) Manufacturers designation, size and-type of motor.
(2) Bore of cylinders.
(3) Number of pistons, vanes or gear data.
(4) Material used in construction, all parts.
(5) Type of bearings.
(6) Rated working pressure and allowable overload.
(7) Manufacturer's torque rating.
(8) Displacement at rated working pressure - Cubic
inches per revolution.
(9) Maximum and minimum urn speed rating (r.p.m.).
(10) Angle of piston rod tilt plate.
(11) Grade of oil used (Military symbol).
(12) Manufacturers tern perature limits.
(13) Weight.
(14) Type of pipe connections and seals.

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business