(7) Winding (d.c.) or design of motors (a.c.).
(10) Power limitation, if any.
(11) Starting current limitation, if any.
Rotor cradLe (sea 220.127.116.11).
Number of sets of special tools (see 18.104.22.168).
Drawings required (see 3.9),
Manuals required and whether complete information for electrical equipment
is required (see 3.10.1, 3.10.3 and 3.10,6),
Whether design data and calculations and design record are required (see 3.11
Quality assurance provisions (see 4.1.2).
Mercury prohibition (see 4.1.4).
Thrust test if required (see 4.3.2(c) and 22.214.171.124).
Vibration test if required (see 4.3.3(d) and 126.96.36.199).
Shock test requirements (see 188.8.131.52) (see 6.1 of MIL-S-901).
Preservation, packaging, packing, marking and shipment requirements (see 5.1).
Identification of procuring agency and design review agency (see 6.4).
Ship type and fluid system in which units are to be installed.
Designation of manufacturer (pump or driver) responsible to the purchaser
for compatibility of pump and driver and operation of the assembled unit.
6.1.1 The procurement document should specify if approval is required for the following: .
(a) Design drawings (see 184.108.40.206).
(b) Preliminary manuals (see 3.1O.1).
6.2 Management control system documents.
The following management control system
(a) MIL-P-15137 (see 3.8.1, 3.8.2, 3.8.4, 220.127.116.11 and 18.104.22.168(b)(6)).
(b) MIL-I-45208 (see 4.1.2).
6.3 The followings table of pump materials shall be used by the manufacturer in
selecting component part materials.
Table III - Pump materials.