|
| MIL-P-71012A (AR)
subjected to all examinations and tests specified in 4.4.2. and
such other inspection as necessary to determine that all the
requirements of this specification and the contract have been met.
4.4.1 First article sample. The contractor shall submit a
first article sample as designated by the contracting officer for
evaluation in accordance with 4.4.2. The first article sample
shall consist of 21 each, Pistol, Semiautomatic, 9mm: M11, and
sets of components as specified in 6.2.
4.4.2 Inspections to be performed. The first article sample
shall be subjected to the following test, in the quantities
specified. Prior to testing the first article pistols shall be
subjected to the examinations specified in 4.5.2.1.2 through
4.5.2.1.15. Component parts shall be inspected as specified in
4.5.2.2.
TABLE II. First article tests
Quantity to
Test
Test
be tested
Requirement
Method
General requirements
21
3.3.1
Manual/SMTE
Caliber
21
3.3.2
CTR
Human engineering
21
3.3.15
4.6.16/Visua
Headspace
21
3.4.1
4.6.1
Trigger pull
21
3.4.2
4.6,2
High pressure resistance
21
3.4.3
4.6.3
Functioning
21
3.4.4
4.6.4
Accuracy and dispersion
21
3.4.5
4.6.5
Interchangeability
21
3.4.6
4.6.6
Reliability
15
3.4.7
4.6,7
Durability
15
3.4.8
4.6.8
Safety
5
3.4.9
4.6.9
Maintainability
15
3.4.10
4.6.10
Environmental
High temperature
3
3.4.11.1
4.6.11.1
Low temperature
3
3.4.11.2
4.6.11.2
Rough handling
3
3.4.12
4.6.12
Corrosion resistance
3
3.4.13
4.6.13
Chemical resistance
1/
3.4.i4
4.6.14
X-ray identification
1
3.4.15
4.6.15
Packaging
5
5
4.6.17
1/ One sample of each non-metallic component (including tritium
sights) for each chemical compound listed in 3.4.1A.
4.4.3 Rejection. The Government reserves the right to
reject the first article and to terminate Its inspection upon any
failure of any assembly, component, or test specimen in the sample
to comply with any of the stated requirements.
14
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |