 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-71012A(AR)
Characteristics
Categories
Critical: None
Defined.
Major:
101.
Marking is legible and correct
102.
Correct location of marking
103.
Correct level of packaging for packing
(see procurement documents)
104.
Correct cleaning and drying
105.
Correct preservative application and drainage
106.
Correct closure of bags and interior packages
107.
Correct cushioning and wrapping
108.
Correct closure and strapping of shipping containers
109.
Correct packing in exterior container
110.
Pistol serial number visible through barrier
material
Minor:
201.
Workmanship
4.5.2.3.2 Repair part packaging. Examination of packaging of
repair parts shall be performed in accordance with the criteria
specified in the contract (see 6.2).
4.5.3 Testing. Testing will be performed in the sequence
listed below.
4.5.3.1 Hiqh-pressure resistance, functioning, and accuracy
and dispersion testing. The contractor shall test each pistol for
high-pressure resistance, functioning, and accuracy and dispersion
in this sequence using the test methods specified in 4.6.3,
4.6.4.1, and 4.6.5 respectively. Pistols failing to meet any of
the requirements shall be rejected. The cause of failure
shall be determined for each rejected pistol and corrective action
shall be taken and recorded prior to resubmittal for acceptance
testing. Unless otherwise specified, restarting shall be performed
following the test methods In 4.6.3, 4.6.4.1, and 4.6.5, as
applicable. If the corrective action performed affects the
validity of previous test/inspections, those tests so affected
must also be repeated and successfully passed for acceptance.
Those tests not affected by the corrective action need not be
repeated, unless directed otherwise by the Government
representative.
4.5.3.2 Headspace and trigger pull testing The contractor
shall test each pistol for headspace and trigger pull using the
test method specified in 4.6.1 and 4.6.2 respectively. Pistols
failing to meet the requirements shall be rejected. The cause of
the failure shall be determined for each rejected pistol and
corrective action shall be taken and recorded prior to resubmittal
for acceptance testing. Restesteing of corrected pistols shall be
18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals