 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-71012A(AR)
5.1.1.4.3 Spare magazine. A spare magazine, if provided,
shall be placed in a waterproof barrier bag IAW MIL-B-117, class
B. Closure to be heat sealed. MIL-B-22019, type II material may
be used in lieu of MIL-B-117. Tape bagged magazine to interior of
weapon unit container to prevent movement.
5.1.1.4.4 Spare parts. Spare parts shall be cleaned, dried,
and preserved in accordance with 5.1.1.1, 5.1.1.2, and 5.1.1.3 as
required. Packaging shall be in accordance with MIL-P-116. The
tritium sight shall be cleaned in accordance with method C-1 and
packaged in accordance with method IC-1 with a supplementary
container of PPP-B-636, W5C.
Not
applicable
5.1.2
Level
B.
5.2 Packaging. A quantity of weapons not to exceed 1,000
pounds shall be placed in a minimum size shipping container. The
container shall conform to requirements for the applicable level
(5.2.1 or 5.2.2). The maximum allowable tolerance for void shall
not exceed 1/2 inch in any dimension (length, width or depth).
Closure/reinforcement shall be in accordance with the requirements
of the applicable container specification (see 6.2).
5.2.1 Level A. The shipping container shall comply with PPP
B-601. Style A, B, I or J, Type OS, Grade B.
5.2.2 Level B. The shipping container shall comply with PPP-
B-640, Style E, class 2. The packed container shall be secured to
an expendable pallet conforming to PPP-P-1660, Type I, Class A,
Grade 2. The pallet shall be the same size as outside length and
width of the container (+0, -5/8 inch). The same type of metallic
strapping selected to reinforce the container shall be used to
secure the container.
5.3 Marking. Unit and exterior shipping containers shall be
marked in accordance with MIL-STD-129. Packing lists are
required. Serial number marking is required and shall be on a
packing list. Nomenclature marking shall be omitted from shipping
container as required by MIL-STD-129 for sensitive items.
requirements of CFR 49 apply.
NOTES
6.
(This section contains information of a general or explanatory
nature that may be helpful, but is not manatory.)
6.1 Intended use. The compact pistols covered by this
specification are intended for use in applications where a
concealable weapon is required.
28
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals