 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-13577C
*
4.3 Classification of inspection. The inspection requirements
Specified herein are classification as follow:
a. First article inspection (see 4.4).
b. Quality conformance inspection (see 4.5).
4.4 First article inspection. The first article (initial production
unit(s)) shall be submitted for impaction In accordance with the contract
(see 6.2 ). The first article shall be representative of the production
processes to be used during quantity production. The first article shall.
be subjected to the quality conformnce InspectIon specified herein and
such other inspection as necessary to determine that all requirements of
the contract have been met.
*
4.5 Quality conformance inspection.
*
4.5.1 Inspection lot. "The formation, size and presentation of in-
spection lots shall be in accordance with MIL-STD-105 and MIL-w-13855.
The sample size for examination Of partst components and assemblies shall
be determined using General Inspection levell 1 of MIL=STD-105.
4.5.2 Examination. Examnination of cleaning rods shall be as spcci-
fled herein and inMIL-W-13855. The examination provisions should
applied at the earliest practical point in manufacture at which it iS
feasible to inspect for acceptance without risk of change in the charac-
teristic by subsequent operations. Reinspections of these characteristics
on the completed product is not required provided assurance exists that
the characteristic has not been changed, degraded or damaged by subsequent
manufacturing, assembly or handling and that adequate inspection records
are maintained.
*
4.5.2.1 Classification of defects. Classification of defects and
acceptable quality levels(AQL'S) for examination in accordance with
MIL-STD-105 shall be as specified herein and shall include the following
provisions:
a.
Unless otherwise specified, AQL'S apply to each listed
characteristic.
Where "Visual" is specified as the Inspection method for
b.
protective coating, the coating shall be visually examined
for completeness, uniformity in appearance and color, and
for freedom from pits, corrosion, scratches$ and worn or
bare spots.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals