 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-46329A(MU)
the sample to the Government, shall inspect the sample to insure that it
conforms. to all the requirements of the contract except for the "Sunshine"
test in 4.7.1.3 herein. The contractor shall submit a record of this in-
spection with the sample, including certificates of conformace for materials.
4.3.2 Contractor testing.- When the contractor is responsible for con-
ducting First Article approval tests, the sample shall be inspected by the
contractor for all the requirements of the contract. The sample and a
record of this inspection, including certificates of conformance for materials,
shall be submitted to the Government for approval. The Government reserves
the right to witness the contractor's inspection.
4.4 Impaction provisions.
4.4.1 Submission of product.- Unless otherwise specified by the con-
tracting officer, inspection lot size, lot formation and presentation of
lots shall be In accordance with Submission of Product" provisions of MIL-
STD-105.
4.4.2 Examination and tests.
4.4.2.1 Components and subassemblies.- All Componcnts and subassemblies
shall be inspected in accordance with the inspection provisions contained in
Supplementary Quality Assurance Revisions (SQAP) listed in the technical
data package (TDP). In the absence of SQAP's, the applicable Quality Assur-
ance Provisions of MIL-F-13926 shall apply, except that MIL-STD-105 sampling
plans shall be utillzed. Examination, and tests related to Section 3
herein shall be performed on a single defect (individual characteristic)
basis in accordance with MIL-STD-105 and the sampling plans specified in
Tables I, and II herein. Examination and tests for packaging, packing,
and marking shall be in accordance with MIL-P-14232 and section 5 herein.
The tabulated classification of defects in Table I and II shall constitute
the minimnm inspection to be performed by the supplier after First Article
approval and prior to Government acceptance or rejection by item or lot.
4.4.2.2 First Article.- First Article testing shall be conducted In
accordame with Tables I and II and shall then meet the sunshine test in
4.7.1.3 in lieu of the weathering and shelf life test (qualification only)
in 4.11.2.
TABLE I - CLASSIFICATION OF DEFECTS
CLASS
REQUIREMENT
CRITICAL; NONE
MAJOR;AQL 0.65%
101. Shock
4.7.1.1
3.4.2
102. Temperature
4.7.1.2
3.4.3
4.7.2.1.1
103 l Resolution
3.5.1
4.7.2.1.2
104, Spherical power
3.5.2
3.5.4
4.7.2.2
105 l Light transmission
4.7.2.1.3
106. Astigmatism
3.5.3
4.0
107. Mirror and window laminations
3.4.4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals