 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-43451A(MU)
118. Collimation repeatability assembling
4.6.3.5.1
3.8.4.1
daylight body to head assembly
3.8.4.2
119. Collimation repeatability, assembling
4.6.3.5.2
passive elbow to daylight body/head
asembly
4.6.6.5
120. Image tilt, daylight and passive
3.8.5
121. Parallelism of reticle and image,
3.8.6
4.6.6.6
daylight and passive
122. Objective focusing range, passive
3.8.7
4.6.6.7
MINOR: NONE
NOTE: The tests in Table I shall be conducted at a temperature between
O
+60 and +90 F.
4.3.3 Acceptance and rejection.- Rejected lots shall be screened
for all defective characteristics. Removal or correction of defective.
units and resubmittance of rejected lots shall be in accordance with
"Acceptance and Rejection" as specified MIL-STD-105.
4.4 Special sampling.
4.4.1 General.- One periscope shall be selected at random as a
special sampling each 100 produced. The sample shall meet the re-
quirements and tests in Table II.
TABLE II
NO. CHARACTERISTIC
REQUIREMENT
TEST PROCEDURE
301. Fabrication
Applicable drawings
3.1
and specifications-
visual
302. General specification
3.3
MIL-F-13926 - visual
4.4.2 Interchangeability.- Three periscopes that have met the require-
ments and tests in 4.3.2.3 and in Table I shall be selected at random as a
special sample from each months production. Each sample shall then meet
the requirement and test in Table III.
TABLE III
TEST PROCEDURE
No l
CHARACTERISTIC
REQUIREMENT
303. Interchangeability, modules
4.6.7.1
3.2a
4.4.3 Environmental.- Three periscopes shall be selected at random
as samples from each 50 produced, or from each months production, which-
ever occurs first. Each sample shall meet the requirements end tests in
Table IV and shall then meet the requirements and tests in 4.3.2.3 and
in Table I.
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals