|
| MIL-P-48619(AR)
3.9 First Article Inspection. -This specification contains
technical provisions for first article inspection. Requirements for
the submission of first article samples by the contractor shall be
as specified in the contract.
3.10 Workmanship. -The periscope shall meet the workmanship
requirements of MIL-F-13926 and applicable specifications as cited
on Drawing 11747440. The optical surfaces shall be free of
scratches and blemishes which may affect their optical qualities or
appearance.
QUALITY ASSURANCE PROVISIONS
4.
4.1 Responsibility for inspection. -Unless otherwise specified
in the contract or purchase order, the supplier is responsible for
the performance of all inspection requirements as specified herein.
Except as otherwise specified in the contract or order, the supplier
may utilize his own or any other facilities suitable for the per-
formance of the inspection requirements specified herein, unless
disapproved by the Government. In addition, the Government reserves
the right to perform any of the inspections set forth in the speci-
fication where such inspections are deemed necessary to assure
supplies and services conform to prescribed requirements.
4.1.1 General provisions. -The component and subassembly
inspection requirements of MIL-F-13926 form a part of the quality
assurance provisions of this specification. Definitions of
inspection terms shall be as listed in MIL-STD-109.
4.2 Classification of Inspections. -Unless otherwise specified
herein or in the contract, the following types of inspection shall
be conducted on this item:
a.
First Article Inspection
b.
Quality Conformance Inspection
4.3 First Article Inspection.
4.3.1 Submission. -The contractor shall submit a first article
sample as designated by the contracting officer for evaluation in
accordance with the provision of 4.3.2. Unless otherwise specified,
the sample for first article approval tests shall consist of three
11
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |