 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-48619(AR)
periscope optical system encased in a single body assembly. The
passive portion utilizes the 24 volt vehicle current source which is
regulated to 2.7 volts, the required voltage to actuate the image
intensifier tube.
6.2 Ordering data. -Procurement documents should specify the
following:
a.
Title, number and date of this specification.
b.
Quantity required and delivery schedules.
c. Applicable packaging data sheet number (see 5.1).
d.
Selection of applicable levels of preservation,
packaging and packing.
e. Applicable stock number.
f.
Requirements for First Article Submission, Including
data requirements for certificates of conformance for
materials.
6.3 Inspection equipment design.
6.3.1 Government desiqn. -Unless otherwise specified in the
contract, all inspection equipment specified by drawing numbner in
specifications or SQAP forming a part of the contract shall be
supplied by the contractor in accordance with technical data listed
in the Technical Data Package (TDP).
6.3.2 Contractor design. -The contractor shall design and supply
inspection equipment compatible with the "Methods of Inspection"
specified in 4.6 of this specification and with the "Test Condi-
tions" specified in the "General requirements" of MIL-STD-810.
Since tolerance of test equipment is normally considered to be
within 10% of the product tolerance for which it is intended, this
inherent error in the test equipment design must be considered as
part of the prescribed product tolerance limit. Thus, concept,
construction, materials and dimensions shall be so selected and
controlled,as to insure that the test equipment will reliably
indicate acceptability of a product which does not exceed 90% of the
prescribed tolerance limit and permit positive rejection when
non-conforming. Construction shall be such as to facilitate routine
calibration of test equipment.
34
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals