Cushioning or dunnage. Supplier shall provide sufficient
cushioning or dunnage material to adequately protect the pump from
damage due to shock and vibration loads encountered during all modes
of handling and transportation. Shock and vibration tests shall be in
accordance with this specification.
In addition to the markings required by the
contract or order, unit packages and shipping, containers shall be marked
in accordance with the requirements of MIL-STD-129.
Intended use. The sea water pump is intended for use in a
torpedo power plant to supply sea water, as a coolant, to an engine,
combustion chamber, and alternator,
Procurement documents should specify the
Title, number and date of this specification
Assigned activity for preproduction tests
Any exceptions to this specification
Inspection data required
Required level of preservation, packaging, and packing
Ready. The condition of the pump when fully assembled, after
completion of servicing and maintenance.
The condition of the pump when operating.
The condition of the pump when stored, trans-
ported, or handled. Tests on the pump, in the non-operating condition,
shall be performed without packaging or packing.
Vibration is a sinusoidal motion defined by
amplitude and frequency. The amplitude may refer to displacement or to
The displacement is given in inches peak-to-peak or the
corresponding maximum acceleration in gravitational units. The
frequency is given in cycles per second.