 |
|||
|
|
|||
| ||||||||||
|
|  MIL-Q-48555A(AR)
The Quadrant shall withstand the Vibration "A" requirements
as specified in paragraph 3.6.4.
3.17 Workmanship.
The workmanship of MIL-F-13926 shall apply.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Res possibility for inspection. Unless otherwise specified
in the contract or purchase order, the supplier is responsible for
the performance of all inspection requirements as specified herein.
Except as otherwise specified, the supplier may utilize his own
facilities or any other facilities suitable for the performance of
the inspection requirements specified herein, unless disapproved by
The Government reserves the right to perform any of
the Government.
the inspections set forth in the specification where such inspections
are deemed necessary to assure supplies and services conform to
prescribed requirements.
4.1.1 Responsibility for compliance. All items must meet all
requirements of sections 3 and 5. The inspection set forth in this
specification shall become a part of the contractor's overall
inspection system or quality program. The absence of any inspection
requirements in the specification shall not relieve the contractor
of the responsibility of assuring that all products or supplies
submitted to the Government for acceptance comply with all require-
ments of the contract.
Sampling in quality conformance does not
authorize submission of known defective material, either indicated
or actual, nor does it commit the Government to acceptance of
defective material.
4.1.2 General provisions. The component and subassembly
inspection requirements of MIL-F-13926 form a part of the quality
assurance provisions of this specification. Definitions of
inspection terms shall be as listed in MIL-STD-109.
4.2 First article (initial production) app roval.
The
requirement for first article approval and the responsibility
(GOvernment or contractor) for first article testing shall be as
specified in the contract. The sample for first article approval
tests shall consist of three (3) quadrants plus three (3) each of
all items covered by QAP. The sample shall be manufactured in the
same maner, using the same materials, equipment, processes, and
procedures as used in regular production. All parts and materials,
including packaging and packing, shall be obtained from the same
source of supply as used in regular production. The 3 quadrants
shall be tested in accordance with, and meet the requirements of,
Tables I and II and paragraph 4.12.2.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals