(Copies of specifications, standards, drawings, and packaging data sheets
required by suppliers in connection with specific procurement functions
should be obtained from the procuring activity or as directed by the
The following document forms a part of
2.2 Other publications.-
this specification to the extent specified herein. Unless otherwise
indicated, the issue in effect on date of invitation for bids or request
for proposal shall apply.
DEFENSE SUPPLY AGENCY MANUAL
Radioactive commodities in the DOD
(Copies of DSAM 4145.8 may be obtained from the Superintendent of
Documents, U. S. Government Printing Office, Washington, D.C. 20402.)
3.1 Regulations pertaining to radioactive devices.- Marking,
identification, handling, and shipping of radioactive devices shall be
in accordance with DSAM 4145.8.
The quadrant shall be manufactured in accordance
with Drawing F11731007.
The following requirements of MIL-F-
3.3 General specification.-
13926 shall be met:
Order of precedence.
Dimensions and tolerances.
Inorganic protective surface finishes.
Part identification and marking.
3.4.1 Storage temperatures.- The quadrant shall show no evidence
of physical failure due to being thermally stabilized at -80 and +160
3.4.2 Operating temperatures.- The quadrant shall meet the applicable
requirements of 3.8 while thermally stabilized at -40 and +150 F.
3.5 Index alinement.- With the micrometer knob indicating zero,
the zero index on Level Holder 11730281 shall coincide with the index on
Arm 6129938 within the width of the index line on the arm. This require-
ment shall be met on each side of the quadrant.
The quadrant shall indicate angular values from
Privacy Statement - Press Release - Copyright Information. - Contact Us